One. Basic Parameters and Specifications:

1. Working range of sub-plate: 300mmx350mm

2. XYZ drive mode: ac servo motor

3. Number of movement axes: 9 axes

4. Program teaching mode: color ccd image intuitive teaching input

5. Operation interface: win7 window operation interface

6. Upper vacuum power: 5hp, lower dust collector power: 3hp (option 5hp)

7. Cutting spindle sycotec (Germany) : max80000rpm (automatic tool change)

8. X-y ac servo speed: 0-1000mm/sec ; z ac servo speed: 0-800mm/sec

10. X-y repetition accuracy: ±0.01mm

11. Cutting accuracy: ±0.02mm

12. Ccd camera calibration accuracy: ±0.01mm

13. Plate stress value: 300uε below

14.Tool diameter: 0.8-2.3mm

15. Pcb board cutting thickness: 0.2mm-6.0mm

16. Main engine and dust collecting mechanical and electrical pressure: 220v 1φ and 3φ

17. Power consumption: 3.5kva

18. Static elimination gun

19. Vision system: high resolution digital camera

20. Drive motor: AC brushless servo motor

21. Mechanical fetching and releasing arm: anti-static vacuum suction nozzle

22. Feeding mode: rail transportation

23. Discharging mode: belt conveying or vehicle output or rail conveying

24. Load shifting mode: vacuum suction nozzle adsorption load shifting

25. Flow direction: left → right

26. Program backup: usb interface

27. Control mode: special controller

28 Dust collection cabinet size: 640mm×785mm×1760mm(d×w×h)

29. Machine size: 2014mm×1230mm×1650mm(d×w×h)

30. Weight of main engine + dust collector: 1000 kg

Two.Introduction to device configuration

1.Double work table structure

Adopt double slide rail and cylinder double platform operation. It can cut different types of products at the same time, and greatly reduce the waiting time of taking and putting plates. At the same time, it can change the double platform to a large single platform, increase the working size, and greatly improve the flexibility of equipment.

2. Under the vacuum spindle structure

a.YSL-910LAT double spindle on-line milling cutter board spliter adopts high speed imported spindle to cut board, greatly reduce the cutting stress, high precision, small inertia, fast response.

b.Milling cutter detection system, real-time monitoring milling cutter state, effectively prevent the phenomenon of continuing to run after cutting.

c.A new vision system, uniform ring light source, with brightness adjustment function, make each type of Mark point better recognition, suitable for such as tin plating, copper plating, gold plating, tin spraying, and various types of different color PCB. The whole system is equipped with visual counterpoint compensation function.

3.Under vacuum structure

Funnel seal design, suction inlet adopts 45 degrees bevel Angle, reduce dust in the internal vortex phenomenon.

4.CNC special controller

The independent CNC special controller integrates the control part, the loop control has strong stability, high precision, fast response transmission and strong anti-interference

5.Collector